|
 |
2008 Alamo Industrial Exten-A-Kut® II
|
 |
|
|
|
|
|
The Exten-A-Kut® II offset mower is designed for cutting grass, weeds, and brush up to one inch in diameter along road-sides, ditch-banks, and other hard-to-reach areas including pond and creek banks. The hydraulically-powered arm can extend the mowing head out 12-feet, 6-inches from the tractor center-line. Being hydraulically-driven, there are no mechanical drive-lines, belts, pulleys, U-joints, or complicated drives. The hydraulic system is powered by a gear pump operating at 39 gallons-per-minute at 540 PTO, which will provide the power you need in tough mowing situations. The operating range of the cutting head is 85 degrees up and 70 degrees down allowing the operator to mow in many different circumstances that are impossible with ordinary mowers. Counterweight is provided with a 60 gallon hydraulic reservoir tank. The large hydraulic oil tank will also permit the system to run cooler in rough mowing conditions. Recommended tractor size is 60 horsepower, however a 45 horsepower tractor may be used with ample front-end counterweight.
|
|
|
|
| Manufacturer |
|
Alamo Industrial |
|
|
| Model Year |
|
2008 |
|
|
| Model |
|
Exten-A-Kut® II |
|
|
| MSRP |
|
Request a Quote
|
|
|
| DIMENSIONS | |
| Overall Width |
|
67-1/2 in. |
|
|
| Cutting Capacity |
|
1 in. diameter, vegetation |
|
|
| HYDRAULICS | |
| Hydraulic Pump |
|
39 gpm @ 540 pto |
|
|
| OPERATIONAL | |
| Tractor Requirements |
|
45 hp minimum, 60 hp recommended |
|
|
| Insurance |
|
Get an Insurance Quote |
|
|
|
|
|
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected. |
|
|
|
|
Specs, Quotes, Overview
