The Alamo Industrial® A 60 and A 72 heavy-duty rotary mowers are just right for cutting grass, weeds, and brush up to three inches in diameter. These units will cut a wide swath of 60 inches and 72 inches respectively, at a rate of 2-1/2-acres per hour at four miles per hour ground speed. The free-swinging, updraft blades produce a smooth cut and distribute the cut material evenly across the width of the mower. For adjusting height of cut, this rugged mowing unit has a full-swiveling, puncture-proof, laminated tailwheel. The cutting height may be adjusted from a minimum of 1-9/16 inches through 12 inches.The Cat 4 (35) driveline has a slip clutch and safety shield. The sturdy gearbox has a 90 horsepower rating. The tailwheel, mounted on a 360° swiveling caster, is laminated and puncture proof. Both units have two skid shoes that are adjustable and replaceable. The cutting height may be adjusted from 1-9/16 inches to 12 inches. The mowers come with debris deflectors as standard equipment.
The A 60 and A 72 may be mounted to tractors with a minimum of 30 and 40 PTO horsepower respectively, with a PTO of 540 or 1,000 rpm. These units are available with a floating CAT I three-point hitch for the A 60 and CAT II three-point hitch for the A 72. Mounting - the A 60 and A 72 may be mounted to tractors with a minimum of 30 and 40 PTO horsepower respectively, with 540 or 1,000 RPM PTO. These units are available with CAT I three-point hitch for the A 60 and CAT II three-point hitch for the A 72.
Specs, Quotes, Overview
