64PTO HP-CAB-12X12 HYD SHUTTLE-2 SETS
AUX-AM/FM/WEATHERBAND-CAST REAR WHEELS-LA1154
Alternator: 60 Amp
Displacement: 203 cu.in. (3331 cc)
Fuel Capacity: 23.8 gal (90 L)
Horsepower: Net - 71 (53 kW) ; PTO - 64 kW (47.7 kW)
Type: 4 Cylinder in-line, Common Rail System, Direct inject
3-Point Hitch - The Category I / II 3-point hitches provide fast and simple attachment of rear-mounted implements. On the M6060 and M7060 it is 3307lbs (1500kg). On the M8560 and M9960 it is 4630lbs (2100kg), with an option of 7275lbs (3300kg). For M8560/M9960 models with the F12/R12 and F24/R24 transmissions, it is 7275lbs (3300kg).
Bevel-gear Front Axle - The bevel-gear front axle provides M60-Series with greater all-around maneuverability. It enables tractors to achieve a tighter turning radius than ever before-an amazing 55 degrees. This makes easy work of jobs in tight spaces. Limited Slip Differential on the front and Differential Lock on the rear are standard features, offering increased stability and traction on challenging ground conditions.
Cab Headroom - The arched beam in the front of the Cab and relocated A/C components allow an extended roof height. This feature not only increases headroom, it also increases overall visibility, especially while using the loader.
Comfortable Seat - Specifically designed to absorb shock and reduce operator fatigue. Standard reclining function and arm rests further enhance comfort, and ROPS models feature a handy holder in the seat-back to store manuals. For greater shock-absorbing performance, Cab models can be optionally equipped with the air-ride seat suspension.
Common Rail System (CRS) with Exhaust Gas Recirculation system (EGR) and Diesel Particulate Filter (DPF) Muffler - The CRS electronically controls the timing and amount of injected fuel providing high-pressure injections in stages, rather than all at once for an optimal combustion rate that results in greater efficiency, better fuel economy and less engine noise. Its combination with the Diesel Particulate Filter (DPF) Muffler and Exhaust Gas Recirculation system (EGR) reduces emissions to meet the latest emission regulations.
Constant RPM Management - All engines provide electronic control of engine RPM. Activating the system keeps engine revolution nearly constant with a push of the switch, preventing a reduction in PTO speed and enabling stable operation. It makes working with PTO-driven implements much more efficient.
Curved Upper Windshield - The curved upper windshield increases upward visibility, making it especially handy when raising the Front Loader.
Easy to Shift 4WD Engagement - Switching the 4-wheel drive on and off is easy and quick, and done with one simple switch* or lever*. Best of all, there's no need to stop the tractor even when moving out of a field onto a road, so you can stay productive. The 4WD indicator on the LED readout lets you know you're in 4WD. (Do not engage while carrying heavy loads, or when rear wheel is spinning.)
* Switch (Electro-Hydraulic on the go) for M7060 F12/R12 and M9960 HDC24 models.
Easy-Step Tilt Steering Wheel - The steering wheel of the Cab gets out of the way when the operator is dismounting the tractor. Just step on a pedal and raise the steering wheel to its original position.
F8/R8 Transmission - The synchronized four speeds of the main shift and a high/low range supply tractors with 8 Forward and 8 Reverse speeds.
Floating Lift Rods - Floating lift rods are standard on both sides of the M8560 and M9960. Floating lift rods give the M8560/M9960 tractors a smoother ride and enhanced traction while using the 3-point hitch, especially on uneven terrain.
Front Wiper - To increase operator visibility on rainy days, the M-Series has a pantograph style front wiper. The unique design of this wiper gives it a wider coverage area.
Fuel Saving Economy PTO - M7060 HD12/HDC 12 (Optional for other models) offer standard 540/540E PTO (Optional for F8/R8 and other M60 series models). For economy PTO operation, change the lever to 540E position. The engine operates at lower RPM to save fuel and reduce operating noise while still turning the PTO shaft at 540RPM. Under the economy PTO operation, 540 PTO RPM is available at 1828 engine RPM on the M6060/M7060, and at 1519 engine RPM on the M8560/M9960.
Heater/Air Conditioner -
The heating and cooling unit is now located under the seat. The overall air circulation in the Cab has been optimized by the Cab's rounded glass as well as by placing the air outlets in the dash tower to keep you cooler on hot summer days and warmer on cold winter days, for year around comfort.
Air is circulated throughout the windshield to prevent icing, frosting and fogging.
Hydraulic Independent PTO - Pulling, lifting, cutting or baling; the hydraulic independent PTO makes your toughest work easier. Self-modulation engagement with an Electric PTO Switch means implements like a rear cutter engage smoothly. The PTO brake engages when the clutch is shut off and securely holds the PTO shaft. The PTO clutch can be hydraulically engaged and disengaged on the go. This means mowing, operating hay equipment or spraying orchards are all made more efficient.
Hydraulic Shuffle - Better than ever, our Hydraulic Shuttle makes shifting between forward and reverse smooth and effortless. With the Hydraulic Shuttle, a column-mounted lever, conveniently located next to the steering wheel, does all the work. Boost productivity, especially while using loaders, by eliminating the need to depress the clutch every time you change directions.
Hydraulic Wet Disc Brakes - To decrease operator effort and increase overall tractor longevity, M7060 F12/R12 and all M8560 and M9960 models now come standard with Hydraulic Wet Disc Brakes. These brakes require less pedal effort and retain high performance efficiency even after repeated heavy-duty work.
Hydraulics - The hydraulics on the M-Series are state-of-the-art. External hydraulic cylinders improve the lifting power and offer easier maintenance. The pump capacity (hitch and remote) is a large 16.2gpm for the M7060 F12/R12 and 17gpm for the M8560/M9960 (15.9gpm for ROPS models). As a result, the front loader cycle times are short, increasing productivity and facilitating operation. One (SCD) hydraulic remote valve is standard, with the option to add up to 2 more, plus an optional flow control valve to control the oil flow volume.
Interim TierIV/TierIV - M6060/M7060 tractors' CRS engines comply with TierIV EPA emission regulations. M8560/M9960 tractors' CRS engines comply with Interim TierIV EPA emission regulations.
Keep productive at your farm by using constant RPM Management - Note: In an mechanically-controlled engine, the engine speed changes according to increases and decreases in the load. For example, in heavy condition (1), or when working in a hilly area, the load increases and engine speed drops while ascending a slope (2), and conversely the load drops when descending (3). These changes in engine speed affect the travel speed and PTO-driven implements. In order to minimize these effects, the operator must make fine adjustments to the travel speed and hand throttle lever.
When the Constant RPM Management switch is turned "On", the engine speed will be kept nearly constant in response to a certain level of work fluctuations. This improves the accuracy of work without the need for troublesome manipulation of the travel speed and hand throttle lever.
There is a limit to the range within which a constant speed can be maintained. If a load exceeding the engine performance is applied, the engine speed will drops. The purpose of Constant RPM Management is not to increase the engine power.
Low Noise and Low Vibration - To help reduce operator fatigue and stress, the CRS engines have been specially designed to minimize noise and vibration. This is accomplished through several innovative technologies. Noise is reduced through a ladder frame crankshaft support, giving the engines a stiffer structure and thus lower noise. Also a gear train on the flywheel side reduces the gear chattering noise caused by crankshaft torsion. Vibration is lowered through the application of compact, built-in balancers.
Multiple Wet Disc Clutch - The multi-plate wet disc clutch provides durability and a long operating life.
New Functional Platform - The Cab has been redesigned for better ergonomics. All levers (except the 4WD lever) and electrical switches are located on the right side for easy access and continuous operations.
Over Drive (F12/R12 and F24/R24 models only) - When H6 gear is selected over drive function limits the maximum engine revolutions at 1960rpm* 2080rpm for M8060 and M9960.
Rounded Glass - We've rounded the Cab glass of our M-Series tractors to provide the operator with more visibility and a more spacious feel-ideal for long days inside the Cab. Furthermore, we've increased the glass coverage area on the Cab door, which makes it easier to get in and out of the Cab.
Standard Equipment -
• Front halogen work lights
• Front windshield wiper and washer
• Rear halogen work lights
• Interior dome light
• External left and right mirrors
• Sun visor
• Cup holder
• Cigarette lighter
• 7-pin trailer coupler
• 3-pin 12V coupler
Telescopic Lower Link Ends - The telescopic lower link ends, standard on all models, further facilitate implement attachment.facilitate implement attachment.
Transmission Parking Lock (M7060 F12/R12 and all M8560 and M9960 models only) - The parking lock can be operated with the main shift lever for easier operation. This lock is highly durable and reliable, providing precise parking on any terrain*.
* Level ground is recommended
Ultra Grand Cab - The innovative and stylish design of the M-Series Cab gives the operator more comfortable and spacious environment year around.
Wide Fenders - Wide and rounded fenders protect the operator from mud splashes.
Gear Range: 6 Speed Fully Synchronized
Brake: Hydraulic Wet Disc
Steering: Hydrostatic power steering ; Standard Tilt Steering
Tire Size: 9.5-24 ; Rear - 16.9-30
Turning Radius: 11.8 ft (3.6 m)
Clearance: Crop Clearance - 18.1 in (460 mm)
Operating Height: Top of CAB - 100.6 in. (2555 mm)
Overall Length: 138.0 in (3505 mm)
Overall Width: 73.0 in (1860 mm)
Tread Width: Front - 55.9, 59.8 in (1420, 1520 mm) ; Rear - 55.9-67.7 in (1420-1720 mm)
Weight: 5380 lbs (2440 kg)
Wheelbase: 83.1 in (2110 mm)
Clutch: Multiple wet disc ; Electro-Hydraulic on-the-go
Deck: Full-flat on CAB models
Hood & Grill: Full Open, Slanted, Steel
Lift: 3307 lbs (1500 kg)
Standard: Hydraulic-shuttle ; Electronic Panels ; Wide, Round Fenders
; Limited Slip Differential/Mechanical Lock
3-Point Linkage: Telescopic lower link ends, Telescopic Stabilizers ; Cat I / II
Hydraulic System: Position, draft (top link sensing) & mixed control ; Two External Cylinders
Pumps: Pump Capacity - 16.2 gpm (61.5 l/min)
Remote Control Valves Available: 1
Power Take-off (pto)
PTO Speed: 540E RPM
System: Live-independent PTO, electro-hydraulic clutch with brake